Videx VX2200 Instrukcja Naprawy Pobierz pdf (Strona 6)

PAGE 6 of 68 VX2200 TECHNICAL MANUAL VER1.5

VOLUME ADJUSTMENT

There are four volume adjusters on the door panel as follows:-

Speaker volume Microphone volume Balance between mic Voice annunciation

volume and speaker volume (May also be

volume labelled ‘V.PB CHIP’

MAKING A CALL

All stages of the call will be acknowledged via the LCD display, voice annunciation and call progress tones.

Additionally, the panel will also prompt the user with information on how to progress to the next stage of the

call. To make a call simply enter the apartment number required and press ‘Enter’. Alternatively, if the panel

has the scroll buttons (‘’,’’,’’) use the ‘’, ‘’ to locate the apartment to call then press ‘’.

USING THE TRADE

On the 4000 Series and 8000 Series panels the

trade feature can only be used with a code. To use

this facility first the TRD connection must to shorted

to ground (As shown in the diagram to the right).

To enter a trade code the panel must be in

standby. Press the clear button (Display will show

‘TRADE C’), enter the code and then press ‘Enter’.

On the vandal resistant panel the trade button can be used as described above or alternatively the trade

button can be used to simply release the door when the button is pressed (As long as the time clock is

active). See diagram below for wiring these options.

WITHOUT CODE WITH CODE

USING AN ACCESS CODE AND ENTERING PROGRAMMING MODE

On panels with a ‘CODE’ button, press ‘CODE’ followed by the code and press ‘Enter’. For panels without a

‘CODE’ button, press ‘0’ followed by the code and press ‘Enter’

Technical specifications

Memory capacity : 998 users

Working voltage : 13 Vdc +/- 10%

Max. absorption : about 350 mA

Working temperature : -10 +50 C°

Relay contacts : 3A@30Vdc, 3A@120Vac

1 2 3 4 5 6 7 8 9 10 11 ... 67 68

Brak uwag

Videx VX2200 Instrukcja Naprawy Strona 6