PAGE 15 of 60 VX2200 TECHNICAL MANUAL VER1.4
The device number is used by the digital concierge to show from which entrance calls are made and for
camera recall on video systems.
Programming notes (3000 and 900 series mode)
In case of a wrong Master/Slave configuration (Dip-switch no.1), the following problems can occur:
a. if the unit should be a Master but is configured as a Slave, the error is signalled by an acoustic
intermittent signal until the problem is resolved;
b. if the unit should be Slave but is configured as Master, the impedance of the system will have a lack of
balance, causing feedback (“Larsen” effect).
When a system uses a concierge unit VX2210-1 the push button combined to the Phone ID 1 (only with the
switches.2 & 3 OFF = ID Group from 1 to 64) is reserved to call the concierge in day and night mode.
WITH THE TWO JUMPERS IN THE RIGHT POSITION (TO WORK ONLY WITH INTERCOMS 3161 &
3162), THE 8 WAY DIP-SW ENABLES THE FOLLOWING:
- Program the 64 push buttons group (switches 2 & 3);
- Program the number of call rings (switches 4 & 5)
- Program the conversation time (switch 6 & 7);
- Program the door opening time (switch 8);
The switch 1 is not used.
PROGRAMMING THE 64 PUSH BUTTON GROUP
PROGRAMMING THE NUMBER OF CALL RINGS
Switch Nr.4 Nr.5 Setting Up
OFF OFF = 2
ON OFF = 4
OFF ON = 6
ON ON = 8
In order to achieve the correct combination between the push buttons and the relevant extensions, it is
advisable to refer to the picture at the back of the module for the correct cabling.
The digital concierge cannot be installed on systems using 3161 intercoms.
Module button wiring colour code:-
Colour Button
blue Buttons Common
yellow Button 1
red Button 2
white Button 3 (4000 Series only)
black Button 4 (4000 Series only)
Technical specifications
Memory capacity : up to 64 users
Working voltage : 13 Vdc +/- 10%
Max. absorption : about 350 mA
Working temperature : -10 +50 C°
Relay contacts : 3A@30Vdc, 3A@120Vac
Switch Nr.2 Nr.3 Setting Up
OFF OFF = from 1 to 64
ON OFF = from 65 to 128
OFF ON = from 129 to 192
ON ON = from 193 to 255
4000 Series LED indicators:
Symbol LED meaning
The first LED (red), if switched ON, indicates that it is not
possible to make a call because a call or a conversation is in
progress (from the outdoor station from which you are calling
or from another outdoor station on systems with multiple
entrances).
The second LED (red), if switched ON, indicates that a call is
in progress. The LED will be switched OFF when the call is
answered.
The third LED (yellow), if switched ON, indicates that it is
possible to speak. The LED will be switched OFF at the end
of the conversation.
The fourth LED (green), if switched ON, means that the door
lock has been released. It will be switched OFF at the end of
the “door opening” time.
PROGRAMMING THE CONVERSATION TIME
Switch Nr.6 Nr.7 Setting Up
OFF OFF = 1 min
ON OFF = 2 min
OFF ON = 3 min
ON ON = 4 min
PROGRAMMING THE DOOR OPEN TIME
Switch Nr.8 Setting Up
OFF = 1 seconds
ON = 6 seconds
(28 strony)
(72 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji