Videx VX2200 Instrukcja Naprawy Pobierz pdf (Strona 42)

PAGE 42 of 60 VX2200 TECHNICAL MANUAL VER1.4

Privacy duration time (Factory default = No time out)

• Press and hold (for approx 10 seconds) the “

” button until the LED next to the button illuminates

and the unit beeps.

• Each time the “

” button is pressed, it will increase (starting from 0) the privacy duration by 15

minutes.

• Press until the required duration has been reached, when reached, wait 5 seconds for a beep and

the LED turning OFF.

• The new time will be stored.

• To set the privacy with no time out (privacy enabled or disabled by pressing the “

” button), don't

press any buttons once in privacy programming mode and wait 5 seconds for the beep and LED to

go off.

Call tone melody (Factory default = melody 1)

• Press and hold “●●” (or “

“on the SL5478) for approx 10 seconds until the LED next to the button

illuminates and the unit plays the current programmed melody.

• Press again the “●●” button (or the “

“ on the SL5478) to listen to the available melodies

(maximum 9). Once the chosen melody has been reached, wait 5 seconds for a beep and the LED

turning OFF.

• The new melody will be stored

Video monitor (SL5478)

The SL5478 is a slimline version of the 5478. This model is surface mount only and unlike the 5478 does

not require a separate mounting plate. Connections, programming, dip-switch settings and functions are

the same as the 5478 with the exception of the “●●” button which is non-latching on the SL5478. The

“

“ button is also used instead of the “●●” button when programming the call tone melody.

Technical Specifications

Addressing range : from 1 to 180 (BIN code)

Stand-by absorption : approx 12mA standby on 12V input

Call absorption : approx 70mA max on 12Vdc input (During a call)

: approx 250mA max on 20Vdc input (During a call)

Working temperature : -10 +50 C°

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Brak uwag

Videx VX2200 Instrukcja Naprawy Strona 42