Videx VX2200 Instrukcja Naprawy Pobierz pdf (Strona 35)

PAGE 35 of 60 VX2200 TECHNICAL MANUAL VER1.4

Programming

Programming is carried out by setting the internal 8 way dip-switch to the positions shown on the

decimal/binary conversion table of this manual.

Additional programming options include:

Programming the Melodies (factory preset melody 1)

• Press and hold the two melody buttons “

” (for approx 10 seconds) until the unit plays the current

stored melody and emits a beep.

• Press the melody button again (left or right) to listen to the available melodies (maximum 9).

• When the chosen melody has been reached, do not press any buttons wait 3 seconds for the exit

beep.

• The new melody is now stored.

Programming the Number of Rings (factory preset = 6 rings)

• Press and hold the “

” button (for approx 10 seconds) until the unit emits a beep.

• Press the “

” button as many times as the number of rings required (i.e. 6 presses = 6 rings with a

maximum of 9 rings)

• Once the number of rings required has been reached, wait 3 seconds for the exit beep.

• The new value is now stored.

Programming the Privacy duration (factory preset = without time out)

• Press and hold the “

” button (for approx 10 seconds) until the unit emits a beep.

• Press the “

” button again to set the privacy duration. Each time the button is pressed, it will

increase the privacy duration by 15 minutes (starting from 0 up to a maximum of 20 hours i.e.

pressing the button 8 times = 2 hours up to a maximum of 80 presses for 20 hours). Once the

required privacy duration has been reached, wait 3 seconds for the exit beep.To set the privacy with

no time out Press and hold the “

” button (for approx 10 seconds) until the unit emits a beep do not

press any other button wait 3 seconds for the exit beep.

• The new value is now stored.

Restore to factory defaults

• Power up the intercom keeping pressed the “

” button;

• The intercom will emit a beep to confirm the operation;

• Release the “

” button.

Technical Specifications

Addressing range : from 1 to 180 (BIN code)

Working voltage : 12Vdc

Stand-by absorption : about 6mA

Phone max. absorption : about 50mA

Working temperature : -10 +50 C°

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag

Videx VX2200 Instrukcja Naprawy Strona 35

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony Videx VX2200